Reseñas de clientes para VEVOR Kit de Línea de Compresor de Aire, Sistema de Tuberías de Aire Comprimido Aluminio HDPE, a Prueba Fugas, Resistente a la Presión y Fácil Instalar, para Talleres de Garajes, Azul, Ø 475 x 200 mm

3/4" line is a little stiff and not the easiest to get 100% straight but that was to be expected. Fittings and clips are nice with water drains if plumbed correct. No leaks at first with 160 psi line pressure but one of the slide in pipes started leaking in attic after inspection one of the seals had torn not sure if it was pressure or installation that damaged it replaced seal dropped line pressure to 90 psi haven't had any issues since

Me costó pagarlo, algún lío co las tarjetas y no pude usar los puntos salvo eso bien, Se podrían vender acoples por separado

I should've got the 200ft version, it comes with more fittings. 300ft kit works fine though

Overall happy with this product. One problem is the aluminum blocks are not tapered threads, making it unnecessarily difficult to seal. Not a deal breaker, but an irritation.

Excellent kit. Easy to install and the fittings worked great. No leaks and worked great to expand the air system in the new 40x80 shop. Would have rated 5 stars but the inability to order extra fittings for further customization of the kit is a bit of a problem. Perhaps this will be corrected in the future.

Works very well. Easy to install and seals well. Absolutely no leaks whatsoever on all connections. Mounting clips hold firmly. Only negative is the aluminum blocks aren't available separately.

Me costó pagarlo, algún lío co las tarjetas y no pude usar los puntos salvo eso bien, Se podrían vender acoples por separado

Definitely not an ideal solution as I had a number of small and irritating installation issues. 1. Maybe I should have gone with 1/2" for my home shop rather than 3/4 as the 3/4 is an absolute bear to bend, and no way will it ever be straight and neat looking 2. Pipe needs to be cut dead square to seal, but with the cutting tool they provide in the kit, it's prety much impossible to get a perfect cut. The cutter is so narrow, there is no way to square the pipe up to the cutter. 3. Now for the biggest issue - the fittings. The fittings kinda have two seals but only one of them is truly effective. The white seal seals to the face of the pipe, so if the face is not 100% perfectly cut (which it will never be) the seal is ineffective. That leaves the circular black seal which sits in a groove and resembles an O-ring, but its not really an O-ring. since it has a beveled surface and sits pretty proud of the sarface, allowing it to easily get damaged during installation. Most other manufacturers utilize an industry standard double O-ring which is pretty much bullet proof. It pretty difficult to get all the leaks stopped as you really have to clamp the nut onto the fitting with a lot of force. And heaven forbid that you push the pipe into into the fitting at even a slight angle as this will cut the black (and only) seal, and you will have to take the joint apart, replace the seal, and them reassemble it. In the end it seems to be working, and the wall blocks are well designed and built, but be prepared to struggle with the install.

The pipe is good but the connectors are bad they leak no matter what you do

the kit its-selve is OK. BUT no chance to order some more of the pieces. No spare parts list. Waisted hours to order more parts through other suppliers. Can therefor not recommend this kit