Seleccione el país/región, el idioma y la moneda que prefiera para comprar.
VEVOR Extractor de Miel Eléctrico 4/8 Marcos Centrífuga Separador de Miel 140 W de Acero Inoxidable con Tapa Adecuado para Nido de Abejas Tamaño Profundo 48 x 23 cm Mediano 48 x 16 cm Altura Ajustable

Reseñas de clientes para VEVOR Extractor de Miel Eléctrico 4/8 Marcos Centrífuga Separador de Miel 140 W de Acero Inoxidable con Tapa Adecuado para Nido de Abejas Tamaño Profundo 48 x 23 cm Mediano 48 x 16 cm Altura Ajustable

Soporte para 8 Marcos (4 Marcos Profundos)

Opiniones de los Clientes

Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
347 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Traducido
Ver original
duy duy
enduser
Price: I got mine 4/8 frame unit for $250. I think it's a good price for an electric extractor Quality: as expected for a unit below $300, the metal is thin but it works OK; the edges of the clear Lexan covers are sharp, they should be rounded over Features: unit has a safety switch to prevent cage from spinning if cover is opened; speed control is included Easy to Use: OK
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Kevin Kevin
Good value for price
I was skeptical before ordering, but gave it a shot as my extraction window was closing quickly... I ran 10 frames through the thing and it did fairly well! At least as good as the other big-name extractors I have used. It does appear to be pretty thin and I don't expect it will take a lot of abuse, but neither would any other brand? I think it was a great value for the price, and am looking forward to next years honey season.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Doc Doc
Mr
Extractor works well - only problem is one side of flip up lid does not rest on the barrel as it should.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Deana Muro Deana Muro
Good value
Overall, I recommend this spinner. Made much quicker work of things for my husband and I. Some quibbles: the hardware is shoddy. We had to take the bolt and wing nut from the gate to a local hardware store to run a die on it as it would not work properly. The hardware on plastic lids (preassembled) was on on the wrong side, which I found out only after I screwed in 12 tiny bolts. Also, the legs need to be at least one guage thicker. All of that said, we think it's of good quality for the price. Overall we are glad we have it.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Matthew Bennett Matthew Bennett
Owner
It was a little wobbly until we had 8 frames of honey extracted in the bottom. From then on it was golden and did a wonderful job. It was easy to clean. Great value.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Dennis Dennis
Beekeeper
It works. It does what it is supposed to do. Needs to be a larger diameter. Medium frames fit, but not without fussing with them. For the price point, it does a fair job. Vevor, in my opinion, could improve their sales by offering a 10 to 12 frame extractor. This 4/8 frame extractor is fine for the hobby beekeeper with no more than 10 hives. Would I buy it again? As a gift to a new beekeeper, Yes. For myself? The answer is, No. I'm afraid it could not keep up with 40 plus hives. If you purchase this, be sure to place a 2x4 block of wood under the back leg, to get the honey to run towards the honey gate on the front. It does run very quiet if it is properly balanced when loaded.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Lois Langley Lois Langley
Ms
Nice unit. Easy to put together. Price was good. Delivery time excellent. 6 frames extracted in 2 hours. Had to file legs edges as were very sharp. Overall a good unit.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Colin Dennis Colin Dennis
Mr.
Unit arrived as advertised in quick time and in new condition. Legs had sharp edges that were removed easily with a file. The extractor worked perfectly but I feel that the legs may fail over time if the unit is screwed down tight and the frames are out of balance. This is the only minor fault I have. Otherwise very good. Overall I am very happy with the extractor. My wife and I used it and it worked perfectly.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Honeybee Honeybee
Extractor
The parcel arrived securely packaged with no damage. The extractor was easy to assemble by following the instructions. Everything was included as per the instructions. Whilst we haven't used it yet, it looks like it will do the job required. Happy with our purchase!
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Jesus P. Jesus P.
Extractor miel
Soporte para 8 Marcos (4 Marcos Profundos)
Funcionamiento correcto, una vez puestos los 4 paneles le cuesta centrifugar, si es para la cara de pocas colmenas vale, es lento, lo hace bien pero con paciencia. Las tapas superiores hay que poner un peso o imán para que no se para ya que si se desencajan un poco se para la máquina por seguridad.
0 personas encontraron esto útil

Quien compró este articulo también compró