Say goodbye to low water pressure: Upgrade to our 3-chamber 12V water pump, which delivers a high flow rate of 1.8 GPM (6.81 L/min) at a constant 60 PSI. It's designed to efficiently and reliably meet all your daily water needs, saving you valuable time.
Automatic pressure switch: Adjust your water pressure with an adjustable range of 40 to 100 PSI. The pressure switch automatically starts the pump when you open the tap and stops it when you close it. Durability tested over 200,000 times, built to last.
Extremely quiet operation: Our 12V diaphragm pump features a pure copper motor for smooth and quiet operation. The plastic pump body and noise-reducing base effectively minimize noise, ensuring that neither your work nor your sleep will be disturbed.
Safety you can trust: This 12V water pump features overheat and overload protection to extend its lifespan. It also supports dry running and has an integrated check valve bypass switch to ensure an uninterrupted water supply, even if the pump or check valve fails.
Standard size, easy replacement: Our 12V diaphragm pump features a standard 1/2-inch MNPT inlet and outlet, making it a breeze to replace your existing pump. It's ideal for use in RVs, boats, campers, food trucks, and more, bringing convenience to your lifestyle.
Product specification
Item model number NMDP33-G18-60-12
Voltage DC 12 V
Power 60 W
Maximum pressure 60 PSI
Maximum flow rate 1.8 GPM / 6.81 L/min
Inlet/outlet diameter 1/2 inch MNPT (OD 20.955 mm)
This 12V diaphragm pump delivers a flow rate of 1.8 GPM (6.81 l/min) and a preset pressure of 60 PSI. It features an adjustable pressure of 40 to 100 PSI, a pure copper motor, and a standard 1/2 inch MNPT connection.
Easily adjust your water pressure with our 12V diaphragm pump. Simply open the pressure switch with a screwdriver, locate the center screw hole, and turn it clockwise to increase the pressure or counterclockwise to decrease it.
Our 12V water pump with pressure switch features a high-quality motor paired with a plastic pump body, effectively reducing noise. The vibration-damping base and cushioned design further minimize noise.
Both the inlet and outlet feature standard 1/2-inch MNPT connections. Our 12-volt water pump with pressure switch ensures compatibility with your existing pump. Replacement and installation are quick and easy.
Our 12V motorhome water pump effortlessly meets all your water needs – from washing and showering to toilet and kitchen use. Enjoy your motorhome life to the fullest with a pump that supports you every step of the way.
Hola muy buenas, estoy considerando esta bomba y alimentada con un kit solar con una bateria LiFePO4.
Estoy considerando vuestro kit solar:
Cargador de batería solar VEVOR de 30 W y 12 V, cargador de mantenimiento de batería solar con controlador inteligente integrado y 3 cables de conexión, resistente al agua IP67.
¿Este kit solar es el adecuado? Valoro mucho los tamaños pequeños, mas que nada por espacio.
Aunque el kit de cargador solar VEVOR de 30 W funciona como cargador de mantenimiento para tu batería LiFePO4, es posible que un panel de 30 W por sí solo no proporcione suficiente producción solar diaria si tienes previsto utilizar la bomba de diafragma con frecuencia o durante ciclos de funcionamiento prolongados.
Si esta respuesta no resuelve tu problema, ponte en contacto con nosotros de nuevo para solicitar ayuda.
By vevor
Helpful
(
0
)
Hola,
Esta bomba viene con filtro?
En una de las fotos del prodicto se ve la bomba con el filtro. Viene incluido o hay que pedirlo a parte?
Gracias